Jump to content
Sports Interactive Community

EnigMattic1

Members+
 View Profile  See their activity

  • Posts

    2,155

  • Joined

  • Last visited

 Content Type 

Forums

Articles

FAQs

Online Manual

Support: Blocks

Support: Games

Bug Tracker

SIGames Manual (beta)

Profiles

Everything posted by EnigMattic1

  1. EnigMattic1
    Honestly mate, it all depends on what information is available. There is no guarantee you could get half the information required. If you can find the information you need, then by all means, go ahead, but don't give yourself too much work as you have already done a hell of a lot on this file.
  2. EnigMattic1
    Attached screenshots and a copy of the file: Screenshots are using the CCAA Championship as an example, but the situation is exactly the same with U-Sports. Canadian MegaPatch - Full Expansion E8.0.fmf
  3. EnigMattic1
    I created a database that, basically, expands the Canadian pyramid. I created 2 cup competitions, both consisting of 8 teams from different leagues, each group of leagues is a different level on the pyramid. My problem is this. Despite both cup competitions working correctly under 'Test Competition' (which I ran for 10 years), my file will not verify due to said competitions having the error "not enough teams found. 0 found, 8 required". As I mentioned above, both competitions work perfectly fine and draw the correct teams from the correct leagues during test. To further add confusion to this issue, if I try and verify all levels at once, verification fails. If I try and do them individually, the error will not come up on ALL the levels in this pyramid. The cup competitions in question are U-Sports and CCAA Championships. The error shows as follows: Level 1 - U-Sports error Level 2 - U-Sports error Level 3 - U-Sports error Level 4 - U-Sports error Level 5 - Verifies fine, no issues Level 6 - Verifies fine, no issues Level 7 - Verifies fine, no issues Level 8 - CCAA error Also, I should point out, Level 6 is where the U-Sports teams are located and Level 7 is where the CCAA teams are located. The 2 cup competitions have absolutely no interaction with any other level other than their own.
  4. EnigMattic1
    The last league kicks up an error, about a cup competition for a level above not having enough teams, despite said Cup competition running perfectly fine in the test
  5. EnigMattic1
    OK, I have now ran a handful of test saves, each for a number of years and I haven't experienced this issue again. As this was first experienced a few versions ago, I would assume that one of the previous updates did something that rectified the issue.
  6. EnigMattic1
    It doesn't appear to be any of the leagues that are causing this problem, it is one of the two cup competitions that I have created. I went back to an older editor file where I didn't have the cup competitions and all the leagues verified. However, when I created one of the 2 cup competitions, that is when I became unable to verify the file. Despite the competition running correctly in testing, it kicks up an error saying "0 teams found, 8 required" when it comes to verification.
  7. EnigMattic1
    Although they are youth leagues, there are also 'independent' teams in there. Basically , not all the teams in those leagues have senior teams. When testing, all competitions work as they should. I have tested upto 2032. When it comes to verification, if I click "all", it fails at the first competition. If I do them individually, they fail until they get down to the U19 Reserves, showing the U-Sports Championship error (which is a cup, not a league). When I try to verify the OPDL, I get the same error as the other failing leagues, but the competition is the CCAA Championship (again, a cup and not a league).
  8. EnigMattic1
    The obvious reply would be, what other roles do you plan on using? How do you plan on setting up the players around the player in the DM position?
  9. EnigMattic1
    This is the error: But, as you can see, that tier has already been verified: And the competition throws up no errors when testing.
  10. EnigMattic1
    The error I get says that there is not enough teams for one of the competitions in tier 6 (0 found, 8 required), despite the fact that I can verify that tier individually.
  11. EnigMattic1
    I have created a file that consists of 8 tiers. I can test all 8 tiers without any problems but, when it comes to verifying the file, that is when the problems start. I can't verify all the tiers. I can verify tiers 5, 6 and 7 individually, but if I try and verify any of the others or verify all at once, it says there is an "error in nation rules" for tier 6, despite that already being verified. However, if I try and verify tier 8, that gives me the same error, but says the error is in tier 7. Can anyone shed any light on this issue?
  12. EnigMattic1
    I only seem to experience this if the league isn't active, but I am managing in that particular country. So, for example, managing an MLS side. I have been busy with expanding a database lately, but I will run a quick test save and see if the issue is still present.
  13. EnigMattic1
    And I thought me trying to expand Canada was hard work, this is a whole different level! Keep it up mate. This looks great!!
  14. EnigMattic1
    If I want to expand a league by 'X' number of teams per year for 'Y' number of years, how do I set this up in advanced rules? For example, 2 teams join in 2024, 2 in 2025 and the final 2 in 2026. Am I right in thinking that I would need a set of rules for each year? And how do I set the teams up in the database? Do I have them set as "Lower League" with a "Next Division" of the league I am moving them into?
  15. EnigMattic1
    1st in each group progress to final. 2nd plays 2nd and 3rd plays 3rd before each winner plays in a 3rd place playoff.
  16. EnigMattic1
    2 groups of 4 with top 3 from each group progressing to a knockout stage.
  17. EnigMattic1
    When, in a competition, it goes from 'Stage 0' to 'Stage 1' for example, how is seeding allocated? Is it possible to allocate seeds to qualified teams? Can I say "teams A&B get seeds 0&1 and C&D get 2&3"? I have been using tie mapping, but I don't entirely understand how it works.
  18. EnigMattic1
    @Drakestone @bluestillidie00 just in time for me to start my final save now I've almost finished my database. @TomDixon77was a skinning legend and this was always my favourite skin on any FM it was available for. Many thanks for resurrecting it for FM22. @bluestillidie00I'm guessing that it was pure coincidence that you released your Steklo22 at 22:22?
  19. EnigMattic1
    What do you mean by "HSports"? I know what U-Sports are, that's the Uni teams. Would I be right in assuming that HSports is high school?
  20. EnigMattic1
    Sorry for not replying sooner, my head has been all over the place with this database. I can't remember what the issue was exactly, but it was to do with the previous stage. However, upon solving that problem and getting the required team to qualify for a new competition, I am now encountering a different issue, again with tie mapping. I know where the problem is, but I don't know what the problem is. This time, the problem is whatever team is seeded as No 5. No matter where I put the team with the index No 5, they never play despite the previous stage being finished. I can swap the ties so 2-5 goes first or second, I can change the opponent, but which ever tie has team 5, never plays. As you can see, I have 6 teams qualified and, in this instance, team 5 is Ambrose University.
  21. EnigMattic1
    I have been trying to set up a playoff for my league which consists of 2 groups (hence the mapping). However, despite 8 teams (4 from each group) qualifying, only 3 quarter finals play. That is how I have the mapping set up. When testing the competition, it is the tie with index 3 that doesn't play. Because the 4th match doesn't play, it then throws out the rest of the playoff as the missing teams join later on.
  22. EnigMattic1
    I can't help but think that the home screen is wasted. Is it possible (and if so, how difficult) to change the appearance so the 3 columns that currently show as "Player Stats", "Pending Transfers" and "Finance & Salary" are actually 2 rows of 3 boxes half the size? Next question. should the above be possible, how would I then go about adding some analysis polygons to this page?
  23. EnigMattic1
    I am unsure as to whether this needs to be in here or development centre, but it appears that academy teams in the US and teams that would feed the superdraft are not generating players. It is the same for lower teams in a Canadian file that I am using but, it appears that, in the US, using Inter Miami as an example, players generated in the youth intake are going into the senior side and the Academy is being left unpopulated. There is no indication of any of the players ever being in the Academy and, to confuse matters, every team outside the US is generating players. Even non league teams in England. I have holidayed, currently, until the end of 2023 and I haven't found a MLS Academy side that has generated players or other teams like the IMG Soccer Academy.
×
×
  • Create New...