Jump to content

Running on iMac with OS 10.4


Recommended Posts

The minimum specs say 10.5.5 but I'm running the Strawberry demo on 10.4.11. But the 3d match engine doesn't run smoothly. Is that because of the OS or because I have 1 GB of RAM? I have the Radeon 1600 graphics card.

I've experienced the same pb with the demo. When in 3D view, I can only see what seems to be 1 image out of 10. And I wonder why.

Is it only a question of OSX version ???

Link to post
Share on other sites

Please may you help me, i dont know what is problem, why i cant start demo, this is my display device.Please help me if you can

Display Devices

---------------

Card name: RADEON 9200 PRO Family (Microsoft Corporation)

Manufacturer: ATI Technologies Inc.

Chip type: RADEON 9200 PRO AGP (0x5960)

DAC type: Internal DAC(500MHz)

Device Key: Enum\PCI\VEN_1002&DEV_5960&SUBSYS_2094148C&REV_01

Display Memory: 128.0 MB

Current Mode: 1024 x 768 (32 bit) (75Hz)

Monitor: SyncMaster 793DF/793MB

Monitor Max Res: 1280,1024

Driver Name: ati2dvag.dll

Driver Version: 6.14.0010.6462 (English)

DDI Version: 9 (or higher)

Driver Attributes: Final Retail

Driver Date/Size: 8/4/2004 00:56:42, 201728 bytes

WHQL Logo'd: Yes

WHQL Date Stamp: n/a

VDD: n/a

Mini VDD: ati2mtag.sys

Mini VDD Date: 8/3/2004 22:29:28, 701440 bytes

Device Identifier: {D7B71EE2-1A20-11CF-026E-9E00A0C2CB35}

Vendor ID: 0x1002

Device ID: 0x5960

SubSys ID: 0x2094148C

Revision ID: 0x0001

Revision ID: 0x0001

Video Accel: ModeMPEG2_C ModeMPEG2_D

Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=DeinterlaceTech_PixelAdaptive

{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=DeinterlaceTech_BOBVerticalStretch

{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,1) Caps=DeinterlaceTech_PixelAdaptive

{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(UYVY,UYVY) Frames(Prev/Fwd/Back)=(0,0,0) Caps=DeinterlaceTech_BOBVerticalStretch

{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,1) Caps=DeinterlaceTech_PixelAdaptive

{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YV12,0x32315659) Frames(Prev/Fwd/Back)=(0,0,0) Caps=DeinterlaceTech_BOBVerticalStretch

{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=DeinterlaceTech_PixelAdaptive

{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=DeinterlaceTech_BOBVerticalStretch

Registry: OK

DDraw Status: Enabled

D3D Status: Enabled

AGP Status: Enabled

DDraw Test Result: Not run

D3D7 Test Result: Not run

D3D8 Test Result: Not run

D3D9 Test Result: Not run

Link to post
Share on other sites

Guys I'm having the exact same problem, also posted in the technical forum about it. I'm on 10.4.11 as well, guess I'm going to have to update to Leopard.

UGOD - runs smoothly on yours right? what are your other specs, apart from the OSX version?

Link to post
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...