MarkMan123 Posted January 24, 2010 Share Posted January 24, 2010 Sorry to be a pain, many of you have probably had to answer this before but - How can I find out what my specs are on my XP laptop and how will I know if they are good enough to run fm10 as I don't really understand that information :confused: Thanks in advance Link to post Share on other sites More sharing options...
Shanksie1975 Posted January 24, 2010 Share Posted January 24, 2010 Start Menu > Control Panel > System Would be the place i'd start to look in. Link to post Share on other sites More sharing options...
ChewyFun Posted January 24, 2010 Share Posted January 24, 2010 You can also go: Start > All programs > Accessories > Run then type: dxdiag Link to post Share on other sites More sharing options...
MarkMan123 Posted January 24, 2010 Author Share Posted January 24, 2010 Thank you both I have 768mb RAM and my processor is 2.00GHz Will that be ok? Link to post Share on other sites More sharing options...
mrmeee17 Posted January 24, 2010 Share Posted January 24, 2010 I'm pretty sure your RAM isn't good enough, but you can give the demo a go to see how it goes. Link to post Share on other sites More sharing options...
Shanksie1975 Posted January 24, 2010 Share Posted January 24, 2010 How many cores / cpu's on the processor? That said, I'd probably suggest some more RAM, as <1gig nowadays is a little low *I'm drunk and not very technical, so please take this with a bucket of salt! . Link to post Share on other sites More sharing options...
MarkMan123 Posted January 24, 2010 Author Share Posted January 24, 2010 1) The game specs say I must have a video card which is 128mb minimum ati radeon 9800 or greater but I have an ati radeon 9000 which says my approx total memory is 32.0MB. Will I be able to still play the game by just using the 2D version? 2) Shanksie1975 - I have no idea how to check how many cores/cpu's on the processor? haha I am useless with this stuff! Link to post Share on other sites More sharing options...
Shanksie1975 Posted January 24, 2010 Share Posted January 24, 2010 When i run dxdaig, my screen shows this: and of you do the system thingy it'll show this: If you have an AMD processor, x2 is 2 cores/cpu's/processors x3 is 3 etc etc, not sure how Intel label such things. Link to post Share on other sites More sharing options...
twater2k2 Posted January 24, 2010 Share Posted January 24, 2010 Nah mate with that graphic's card it wouldn't even boot up you will need to upgrade. Link to post Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.